Cleaning steps of automobile water tank

2022-07-22
  • Detail

Today's engines are hotter than they used to be. The function of the automobile water tank is to dissipate heat. Because some water use and other reasons often cause scale in the water tank. If it is not removed in time, it will affect the heat dissipation. Therefore, it is necessary to clean the automobile water tank in time. The following small series briefly introduces the steps of cleaning the automobile water tank

today's engines operate at higher temperatures than in the past. The function of the automobile water tank is to dissipate heat. Because some water use and other reasons often cause scale in the water tank. If it is not removed in time, it will affect the heat dissipation. Therefore, it is necessary to clean the automobile water tank in time. The following small series briefly introduces the steps of cleaning the automobile water tank

· Specific steps for cleaning the car water tank

first, make sure that the engine is in a cooling state and shut down. Remove the radiator cap and make sure the engine is cold. If the radiator cap is too hot to touch, it means that the engine has not cooled down

second, open the drain plug at the bottom of the radiator and let the coolant flow into a bucket. The coolant should be handled properly to avoid harm to the environment

third, close the drain plug and fill the radiator with water; Car water tank cleaning

fourth, turn on the engine, turn on the heater control system (this operation will open the heater control valve), add the cooling system detergent, and idle the engine for 30 minutes (or operate according to the instructions on the detergent bottle)

fifth, turn off the engine and let it cool for 5 minutes. Drain the liquid in the radiator

sixth, close the drain plug, fill the radiator with water and let the engine idle for 5 minutes. Then refill the compound of 50/50 water and glycol antifreeze/coolant (use the coolant previously used in the car)

· Car water tank cleaning steps

1. The engine is in the shutdown and cooling state. Open the water tank cover, slowly add the automatic cleaning agent of the water tank into the water tank to make the cooling water reach the normal position, and tighten the water tank cover

2. Start the engine to make the water temperature reach the normal temperature, and then operate for 1-40h as appropriate. If there is hard scale in the cooling system, the operation time should be extended for 10-48h

3. Shut down the engine, drain the cooling water with fouling, and replace it with antifreeze or clean cooling water

4. Clean with automatic cleaning agent of water tank once a year

the relevant information about car water tank cleaning is introduced here. I hope this article is helpful to you. If there is anything else you don't understand, you can follow us and we will answer it for you as soon as possible

昆明皮肤病医院

南京性病医院

天津皮肤病医院

Copyright © 2011 JIN SHI